Frequent question: How much clearance does a electric water heater need?

So the National Electrical Code requirement (NEC 110.26[A]) for equipment “likely to require examination, adjustment, servicing or maintenance while energized” applies, which specifies a working space 36” deep and 30” wide in front of the water heater.

How much clearance does an electric hot water heater need?

Water heaters must be surrounded by a certain amount of clearance, or air space, to function properly and safely. A clearance area of 12 inches is required on all sides of a hot water heater. A certain amount of airflow is also required for proper combustion and ventilation.

Can you enclose an electric hot water heater?

In most instances, a home’s water heater is placed in the basement. … You can enclose the water heater by building a wall around it and constructing a utility closet.

Can an electric water heater sit on the floor?

Electric water heaters can sit directly on the concrete floor. There is no risk of accidental ignition of spilled flammable liquids with electric water heaters. … The only reason why you would want to have them off the ground is to save energy or protect the water heater from flooding/rust damage.

GOOD TO KNOW:  Is it normal to buzz electrical panel?

Can you put stuff next to water heater?

Store combustible materials within 18 inches of your water heater. Flammable items placed closer than that could potentially catch fire. Don’t … Store items that are prone to moisture damage such as books, papers, or magazines near the water heater.

Is it safe to sleep in a room with a water heater?

It is perfectly safe to sleep in a room with an electric water heater. Gas water heaters should not be placed in a bedroom unless they are direct vent type or separated by a weather-stripped self-close door. The combustion air must always be drawn from the exterior.

Do electric water heaters have an ignition source?

An ignition source could be many things, including an open flame, electrical switch, open resistance heating coils, or an electrical igniter unit. … Electric water heaters having all switching controls located above 18” from the bottom of the water heater are not required to be elevated.

Can a water heater touch the wall?

water heater can sit against wall, but this can restrict air flow… so keep stuff away from gas water heater.

Can I install my own water heater in Texas?

A Water Heater Installation Requires A Plumbing Permit In Texas. Since 2007, Texas Requires A Plumbing Permit For A Water Heater Replacement. The permit requires a licensed plumber install the water heater in compliance with the State of Texas + any Local Municipality Plumbing Codes.