What is the difference between Class 1 and Class 2 electrical equipment? The Earth continuity and insulation resistance tests are carried out when the class 1 appliances are tested. The user of a Class 2 appliance is protected by two layers of insulation. Class 2 appliances are also known as Double insulated.
What is class 1 and class 2 electrical equipment?
Class 1 and Class 2 appliances are all powered by mains voltages. Both classes are required to provide at least two levels of protection to the end user. You could see this as a back-up; if one protection layer fails then the second layer back-up is still in place. This makes electrical equipment safe to use.
What is Class II electrical equipment?
A Class II or double insulated electrical appliance is one which has been designed in such a way that it does not require a safety connection to electrical earth (ground).
Is a fridge freezer Class 1 or 2?
Examples of Class 1 equipment are toasters, kettles, microwaves, fridges, freezers and washing machines. Class 2 equipment has supplementary insulation and is easily identified by the double square symbol.
What is a Class 2?
Class II (with Roman numerals) refers to power supplies with either a double or reinforced insulation barrier between the input and the output. Class II supplies do not rely on an earth connection to protect against shock hazard. Many cell phone chargers and laptop power supplies are Class II.
Is 110V class 1 or 2?
A 110V transformer is a Class I, 230V appliance. On the plastic case types, the earth bond should be taken from the earth pin on 110V socket. … For metal cased transformers, an earth bond test should be carried out on the casing as well as the 110V sockets.
Is a monitor class 1 or 2?
Monitors and computers are Class 1 earthed appliances and are powered via an earthed IEC 3 core 230 V power lead, although there are exception which are powered from low voltage PSUs which can be Class 1 or Class 2 double insulated products.
Are washing machines Class 1 or 2?
Examples of Class 1 equipment are Kettles, Toasters, Irons, Microwaves, Electric Heaters, Fridges, Freezers, Washing Machines and Tumble Dryers etc.
Is a printer class 1 or 2?
Commercial / large office printers are always Class 1. The smaller home type of printer is generally Class 2 and can be seen by the figure of 8 lead connected into the rear of the printer. Monitors again can be either fed from a transformer supply or can have an IEC lead directly into the back of the monitor.
What are Class I II and III medical devices?
Class II devices are intermediate-risk devices. Examples include computed tomography (CT) scanners or infusion pumps for intravenous medications. Class III devices are high-risk devices that are very important to health or sustaining life. Examples include pacemakers and deep-brain stimulators.
How can you tell if an electric tool is grounded?
Check electric tools to ensure that a tool with a 3-prong plug has an approved 3-wire cord and is grounded. The three-prong plug should be plugged in a properly grounded 3-pole outlet. If an adapter must be used to accommodate a two-hole receptacle, the adapter wire must be attached to a known, functioning ground.
What class is electrical equipment?
Depending on how exactly the protection is provided, electrical appliances are put into five classes of equipment construction, Class I, II, III, 0 and 01. Of these the most important are Class I and II, but for reasons of completeness all the classes are described below.